3 Star Hotel Furniture Manufacturer Introduces The Installation Knowledge Of Cabinet Furniture
US Free Ads
The Most Popular Online Classifieds in USA.
No Sign up, No Email Required to Post.
US Free Advertising
Free Advertising Classified Ads.
Free Internet Web Site Advertising.
We sometimes think about installing cabinet furniture, but we don’t know the steps and precautions for cabinet furniture installation. Then 3 Star Hotel Furniture Manufacturer will tell you the steps for installing cabinet furniture:
1. Open the package. Confirm the number of products before opening the package. For example, if the words "5-1" are printed on the carton, it means there are five boxes of the product. Please count the number of packages; open the carton package, put the hardware package into a container separately, and count to avoid loss; carefully Read the installation drawings and count all the panels. Separate the plates. Place the boards separately so that they can be installed correctly.
2. Prepare a Phillips screwdriver. Install the drawer type rails, remove the slide rails and side panels; press the mounting holes on the side panels and fasten them with 8 mm flat head screws.
3. Install the connector. Screw the combination screws (including the discus and screws) into the front or side of the plate respectively; do not install the dowels repeatedly in the corresponding hole positions, pay attention.
4. Install the cabinet. Connect the bottom plate and the side plate, and use the tenon joint to lock the 15mm discus connector; connect the bottom plate and the side plate, use the tenon to locate and lock the discus connector;
5. Install and tighten the footnotes at the back; install the panel and tighten the discus joint. The frame is assembled. Install the drawer. Install the drawer, pull the handle, and insert it. Pull out the drawer smoothly to prove the correct installation.
6. Install the cabinet and cabinet door. Insert the shelf plug into the preset hole on the side panel of the cabinet, insert the shelf; use 25mm screws and the clothing support and clothing support to install on the fixed shelf; hinge the door on the circular door hinge groove of the door panel, and then tighten Solid; center the positioning hole and connect with the left and right side plates;
7. Adjust the door panel. Move the cabinet to a proper position. If the floor is not level, you can pad appropriate hard objects on the four corners of the bottom of the cabinet to balance the height of the cabinet; adjust the screws on the door hinges to maintain the height of the gap between the door panel and the door panel Consistent.
Through the above introduction, Hotel Bedroom Furniture Manufacturers hopes that you can simply refer to the content of this article in future use.
|Related Link: Click here to visit item owner's website (0 hit)|
|Target Nation: England|
Target City : All Cities
Last Update : 12 November 2020 8:11 AM
Number of Views: 61
|Item Owner : zhuangheningbo|
Contact Email: (None)
Contact Phone: (None)
|Friendly reminder: Click here to read some tips.|